List of Axis encoders/cameras supported
 |
|||
|
The following cameras have been tested:
|
The following Encoders have been tested:
|
Software Version Required |
Notes |
| Firmware Version | |||
| Initial DSS Software Version | 5041D4 | ||
| Video Compression | MJPEG,MPEG-4,H.264 | ||
| Supported Resolution | |||
| MJPEG | |||
| NTSC | See Manufacturer Specification | ||
| PAL | See Manufacturer Specification | ||
| Frame Rate Limiting | Yes | ||
| MPEG-4 | |||
| NTSC | See Manufacturer Specification | ||
| PAL | See Manufacturer Specification | ||
| Frame Rate Limiting | Yes | ||
| H.264 | |||
| NTSC | See Manufacturer Specification | ||
| PAL | See Manufacturer Specification | ||
| Frame Rate Limiting | Yes | ||
| Alarms | |||
| Motion Detection Alarms | Yes |
Needs to be configured on the Encoder web interface. |
|
| IO Alarms | No | ||
| Multicast Support | Yes - Dependant on Camera | ||
| IO Support | |||
| Inputs: | 0 | ||
| Outputs: | 0 | ||
| PTZ Support | |||
| Onboard: | Yes | ||
| Serial : | No | ||
| Setup Notes |
The following cameras have not been tested locally. Cathexis will not be held responsible for any malfunctioning cameras or software while using these cameras
- Axis 221MF
- Axis 211
- Axis 216
- Axis 225